Loading... Please wait...

Categories

Our Newsletter


Sort by:

Automatic Water leveller

Installing a water leveller will reduce equipment damage caused by the pump running dry.
Splashing + Evaporation + Backwashing = Water Loss = Equipment Damage!

We have two styles of Water Levellers.

The Flip N Fill Garden is designed to be installed on existing pools where no provision for water level control has been made. This version connects to a garden hose (hence its name),  and operates in the same way as the permanently installed version. It is a simple and effective means of achieving automatic water levelling for any pool after completion. The hose simply connects to the valve through the cap in the centre of the lid. You disconnect the hose, remove the lid and valve assembly to gain access to the skimmer basket.

Just like its permanently installed counterpart, it represents excellent value.
 
The Flip N Fill Permanent is designed to be installed during the building of the pool. The product comes with 9 metres of 8mm PVC tubing which the pool builder runs underground to the water supply during construction. This is a simple and effective process that offers hassle free automatic water levelling for the pool at a very affordable price. The PVC tube comes out the back of the lid under the pavers or concrete just above the top of the skimmer box. You leave enough plastic tube wrapped around inside the lid so you can easily remove the lid & valve assembly to gain access to the basket.
 
water_leveller.jpg
Lid
The Flip N Fill lid is constructed of high density PVC as one of the major causes of failures is impact failure. The FNF is constructed to last with denser material and ribbing to take direct impact. It has also been designed with ribbing to enhance grip when stood on, and has two handy finger grips for easy removal when access to the skimmer box is required.

 
Cap
The cap is of similar construction to the lid and allows for easy removal in order to fit or check the tubing connection when required. With this permanent version of the Flip N Fill no external water supply connection is required as the water feed line is connected during construction and enters the skimmer box below the surface. Just set and forget for automatic water levelling of your pool.

 
Valve
The valve system employs a simple but extremely sensitive float system that moves up and down relative to the water in your pool. When the pool water falls away to a level preset by the pool builder, the falling float triggers the valve to open and allows water to flow into the skimmer box and hence fills the pool. When the water again rises and raises the float up, the unit resets and stops the water flow.

 
Rings
Each Flip N Fill unit comes with three rings to accommodate several types of Skimmer boxes with varying size lids. The option of using one of three rings means this unit will fit more than 95% of all known skimmer boxes. Choose the ring that fits the particular skimmer box, and forget the rest.